Answering A Call; Do-Not-Disturb - Huawei EchoLife ET323 User Manual

EchoLife ET523 IP Phone User Manual
For example:

192.168.0.2 calls 192.168.0.3— dial #*3, followed by SEND.
192.168.0.2 dials #*3; #*03; or #*003, which means the same– – call
192.168.0.3.

192.168.0.2 calls 192.168.0.23– – dial #*23, followed by SEND.

192.168.0.2 calls 192.168.0.123– – dial #*123, followed by SEND.
If the SIP Server is configured, a Direct IP-IP call still works. If you use the
STUN, the Direct IP-IP call will also use the STUN. Set Use Random Port
to No when completing Direct IP calls.

Answering a Call

Answering a Call

One incoming call: The phone rings with the selected ringtone. The corresponding
account LINE flashes. Pick up the handset, press SPEAKER, enable the headset or
press the blinking LINE key to answer the call.

Multiple incoming calls: The call waiting tone (discontinuous tone) is played. The
next available line will flash in red.

Paging/Intercom enabled: The phone beeps for one time. and then automatically
establishes the call through the hands-free mode. (This feature must be supported by
the PBX/server.)

Do-Not-Disturb

To block all incoming calls, you can enable the Do-not-Disturb function. The phone
will not ring, and callers will be directed to the voicemail if you have one. To
enable/disable this function, press MUTE/DEL in the idle mode and do as follows:
Step 1
Press OK.
Step 2
Select Preference by pressing the navigation keys and press OK.
Step 3
Select Do Not Disturb by pressing the navigation keys and press OK.
Step 4
Select Enable DND or Disable DND depending on your requirements and
press OK.
19
3 Using the IP Phone