Preparing Vessi™ Fermentor & Dispenser For Use - Whirlpool Vessi Use And Care Manual

SETTING UP YOUR VESSI™ FERMENTOR
& DISPENSER
PREPARING VESSI™
FERMENTOR & DISPENSER
FOR USE
ASSEMBLY
Remove all protective film from
1
the fermentor�
Remove the modular work surface
2
from the top of the cabinet�
If desired, attach the modular
work surface using the keyhole
3
slots and posts located on either
side of the cabinet�
NOTE: If the fermentor is being placed
adjacent to, or in a cabinet, the posts
and shims can be removed for a flush fit�
16 | SETTING UP YOUR VESSI™ FERMENTOR & DISPENSER
Install the faucet tower�
Remove the faucet tower from
its packaging�
Remove the 4 screws holding
4
the black gasket to the console�
Align the faucet tower and black
gasket with the 4 screw holes in
the console�
Loosely screw in all 4 stainless steel
5
screws provided, then hand-tighten
all screws�
Black
gasket