12 | Setting Up Your Vessi™ Fermentor & Dispenser; Unpacking; Installing The Co Tank - Whirlpool Vessi Use And Care Manual

SETTING UP YOUR VESSI™ FERMENTOR
& DISPENSER

UNPACKING

Cut straps, open top flaps, and
remove foam blocks and corner
1
posts� Lift the carton off� Dispose
of/recycle all packaging materials�
Using a / wrench, remove the
7
2
16
4 shipping brackets�
WARNING
Excessive Weight Hazard
Use two or more people to move
and install VESSI™ Fermentor
& Dispenser.
Failure to do so can result in
back or other injury.
Using 2 or more people, lift the
3
fermentor from the pallet�
12 | SETTING UP YOUR VESSI™ FERMENTOR & DISPENSER
The Vessi™ Fermentor &
Dispenser has 2 swivel casters in
the rear and 2 non-swivel locking
casters in the front� Push the
4
fermentor from the front, keeping
the swivel casters forward for
proper steering�
Set the fermentor in place and,
if desired, lock the 2 front casters�
Remove accessory bag from inside
the vessel and from the base shelf�
5
Unpack and dispose of/recycle
all packaging materials�
INSTALLING THE CO
WARNING
Asphyxiation Hazard
Do not use a CO2 tank larger
than 5 lbs.
Doing so can result in death or
serious injury.
A 5-lb food grade CO
installed inside the fermentor) is needed�
One may be rented from a gas supply
company�
IMPORTANT: Reference all warnings
provided with the CO
TANK
2
tank (to be
2
tank�
2