Mechanical Installation
4 Mechanical Installation
4.1 How to Get Started
This chapter covers mechanical and electrical installations
to and from power terminals and control card terminals.
4
4
Electrical installation of options is described in the relevant
Operating Instructions and Design Guide.
WARNING
Read the safety instructions before installing the unit.
Failure to follow recommendations could result in death or serious injury.
Mechanical Installation
•
Mechanical mounting
Electrical Installation
•
Connection to Mains and Protecting Earth
•
Motor connection and cables
•
Fuses and circuit breakers
•
Control terminals - cables
Quick Setup
•
keypad
•
Auto Tune
•
Programming
Unit size is depending on enclosure type, power range and
mains voltage
40
AF-600 FP High Power Operating Instructions
The frequency converter is designed to achieve a quick
and EMC-correct installation by following the steps
described below.
Illustration 4.1 Diagram showing basic installation including
mains, motor, start/stop key, and potentiometer for speed
adjustment.