References
Commissioning Manual SINUMERIK Operate / SINUMERIK 840D sl
Multiple load points
If you have configured several loading points for a magazine, then the "Loading Point
Selection" window appears after pressing the "Load" softkey.
Select the required load point and confirm with the "OK" softkey.
12.7
Tool data OEM
You have the option of configuring the list according to your requirements:
References
For more information, see the following references:
Commissioning Manual SINUMERIK Operate / SINUMERIK 840D sl
Procedure
Milling
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
1.
Select the "Parameter" operating area.
2.
Press the "OEM Tool" soft key.
Tool management
12.7 Tool data OEM
485