Creating G Code Program; Graphical Programming - Siemens SINUMERIK 840D Operating Manual

Creating G code program

6.1

Graphical programming

Functions
The following functionality is available:
● Technology-oriented program step selection (cycles) using softkeys
● Input windows for parameter assignment with animated help screens
● Context-sensitive online help for every input window
● Support with contour input (geometry processor)
Call and return conditions
● The G functions active before the cycle call and the programmable frame remain active
● The starting position must be approached in the higher-level program before the cycle is
Milling
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
beyond the cycle.
called. The coordinates are programmed in a clockwise coordinate system.
6
195