Nms Login Example - HP A5830 Series Configuration Manual

Task...
4. Add a user to the SNMP
group

NMS login example

In this example, iMC is used as the NMS for illustration.
Configuration on the device
1.
# Assign the IP address of device. Make sure the device and the NMS can reach each other.
(Configuration steps are omitted.)
# Enter system view.
<Sysname> system-view
# Enable the SNMP agent.
[Sysname] snmp-agent
# Configure an SNMP group.
[Sysname] snmp-agent group v3 managev3group
# Add a user to the SNMP group.
[Sysname] snmp-agent usm-user v3 managev3user managev3group
Configuration on the NMS
2.
On the PC, start the browser. In the address bar, enter http://192.168.20.107:8080/imc, where
192.168.20.107 is the IP address of the iMC.
Command...
snmp-agent usm-user v3 user-
name group-name [ [ cipher ]
authentication-mode { md5 |
sha } auth-password [ privacy-
mode { 3des | aes128 | des56 }
priv-password ] ] [ acl acl-
number ]
60
Remarks
Required
If the cipher keyword is specified,
both auth-password and priv-
password are cipher-text
passwords.