Configuring Common Settings For Vty User Interfaces (Optional) - HP A5830 Series Configuration Manual

Figure 14 Configuration page

Configuring common settings for VTY user interfaces (optional)

CAUTION:
The auto-execute command command may disable configuring the system through the user interface to
which the command is applied. Before configuring the command and saving the configuration (by using the
save command), make sure that you can access the device through VTY or AUX user interfaces to remove the
configuration if a problem occurs.
Task...
1. Enter system view.
2. Enable
information.
3. Enter one or multiple VTY user
interface views.
4. User
interface
configura
tion.
display of copyright
a. Enable the
terminal
service.
b. Enable the
current user
interfaced to
support
either Telnet,
SSH, or both
of them.
Command...
system-view
copyright-info enable
user-interface vty first-
number [ last-number ]
Shell
protocol inbound { all
| ssh | telnet }
42
Remarks
—
Optional.
Enabled by default.
—
Optional.
Enabled by default.
Optional
By default, both protocols are supported.
The configuration takes effect next time you log
in.