Task...
10.
Specify
service type for the
local user.
11.
Exit to system view.
12.
Create
interface and enter
its view.
13.
Assign
address and subnet
mask to the VLAN
interface.
Displaying web login
Task...
1.
Display
web users.
2.
Display
information.
3.
Display
information.
Web login example
HTTP login example
Network requirements
As shown in
Figure
is 192.168.20.66/24.
Figure 18 Network diagram for configuring HTTP login
Configuration procedure
Configuration on the device
1.
Command...
the
web
service-type web
quit
a
VLAN
interface vlan-interface
vlan-interface-id
an
IP
ip address ip-address
{ mask | mask-length }
Command...
display web users [ | { begin |
information
about
exclude | include } regular-
expression ]
display ip http [ | { begin |
HTTP
state
exclude | include } regular-
expression ]
display ip https [ | { begin |
HTTPS
state
exclude | include } regular-
expression ]
18, the PC is connected to the device over an IP network. The IP address of the Device
Remarks
Required.
By default, no service type is configured for the local
user.
—
Required.
If the VLAN interface already exists, the command
enters its view.
Required.
By default, no IP address is assigned to the VLAN
interface.
Remarks
Available in any view.
Available in any view.
Available in any view.
53