Ac Power Cable - Epson RC90 Safety And Installation

2.7.2 AC Power Cable

WARNING
The AC plug is the optional part.
Attach a proper plug to the cable that is suitable for the factory power supply.
Connection Specification of Cable Wire
Specification of Power plug (option)
Cable length: 3 m (Standard)
Safety and Installation (RC90 / EPSON RC+ 7.0) Rev.6
■
Be sure to connect the AC power cable to a power receptacle. DO
NOT connect it directly to a factory power source. To shut off
power to the robot system, pull out the power plug from the power
source. Performing any work while connecting the AC power
cable to a factory power source is extremely hazardous and may
result in electric shock and/or malfunction of the robot system
■
Make sure that cable manufacturing and connection are done by
a qualified personal.
When proceeding, be sure to connect the earth wire of the AC
power cable colored green/yellow on the Controller to the earth
terminal of the factory power supply. The equipment must be
grounded properly at all times to avoid the risk of electric shock.
Always use a power plug and receptacle for power connecting
cable. Never connect the Controller directly to the factory power
supply. (Field wiring)
Purpose
AC power wire (2 cables)
Ground wire
Name
AC plug
Black
Green / Yellow
Model Manufacturer
4222R AMERICAN DENKI
2. Installation
Color
69