I/O Check - Mitsubishi Electric GT16 User Manual

14.1.6 I/O check


I/O check function
The I/O check is a function which checks whether GOT and PLC can communicate with each other.
If I/O check ends normally, the communication interface and the connection cable hardwares are normal.
To execute I/O check, the communication driver has to be installed in GOT in advance from GT Designer3.
Note that the GOT restarts when this function is performed.
Refer to the following for the details related to the installation of the communication driver.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
(1) Communication drivers inapplicable to I/O check
When the following communication drivers are used, the I/O check cannot be executed.
Connection to MITSUBISHI PLC
Connection to FUJI FA PLC
Connection to YASKAWA PLC
Connection to YOKOGAWA PLC
Connection to ALLEN-BRADLEY PLC
Connection to SIEMENS PLC
Microcomputer connection
Inverter connection
®
MODBUS /TCP connection
Connection to AZBIL control equipment
Connection to RKC temperature controller

Display operation of I/O Check
Main menu
( 10.3 Utility Display)
Touch
[Self check]
I/O check
Connection type
Ethernet connection
Self check
Touch
[Diagnostic functions]
Communication driver
Ethernet(MELSEC), Q17nNC, CRnD-700
FUJI PXR/PXG/PXH
YASKAWA GL/CP9200(SH/H)/CP9300MS, Ethernet (YASKAWA)
YOKOGAWA FA500/FA-M3/STARDOM, Ethernet (YOKOGAWA)
EtherNet/IP(AB)
SIEMENS S7, SIEMENS S7-200, SIEMENS S7-300/400
Computer
FREQROL 500/700
MODBUS/TCP
AZBIL SDC/DMC
RKC SR Mini HG (MODBUS)
Diagnostic functions
14. SELF CHECK
14.1 Diagnostic Functions
Touch
[I/O check]
14 - 15
9
10
11
12
13
14
15
16