Panasonic KX-HDV130 Manual page 286

5.3.22 SIP Settings
Web User Interface Reference
SIP_HOLD_ATTRIBUTE_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
SDP_USER_ID_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
TELEVENT_PAYLOAD
Value Format
Description
Value Range
Default Value
Web User Interface Reference
HOLD_SOUND_PATH_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
286 Administrator Guide
Enable c=0.0.0.0 Hold (RFC 2543)
INTEGER
Specifies whether to set "a=inactive " or not when the call is on hold.
•
0: send only
•
1: inactive
0
STRING
Specifies the user ID used in the "o=" line field of SDP.
Max. 32 characters
Empty string
INTEGER
Specifies the RFC 2833 payload type for DTMF tones.
Note
•
This setting is available only when "DTMF_METHOD_n" is set to
"0".
96–127
101
Telephone-event Payload Type
INTEGER
Specifies whether the unit's hold tone or the network server's hold
tone (Music on hold) is played when a party is put on hold.
Note
•
It is necessary to set the following parameters to play the unit's
hold tone.
–
HOLD_TONE_FRQ
–
HOLD_TONE_GAIN
Document Version: 2017-07