3.
Tap
/
→ "IPv4 Settings"
4.
Tap
/
→ "Connection Mode"
5.
Select "DHCP" → "OK"
6.
Tap
/
→ "DNS"
7.
Select "Auto" → "OK."
•
Select Manual to enter the addresses for DNS1 (primary DNS server) and, if necessary, DNS2
(secondary DNS server) manually, and then tap "OK".
To configure network settings manually
KX-HDV130/KX-HDV230
[In standby mode]
1.
2.
[ ]/[ ]: "System Settings" →
3.
[ ]/[ ]: "Network Settings" →
4.
[ ]/[ ]: "IPv4 Settings" →
5.
[ ]/[ ]: "Static" →
6.
Enter the IP address, subnet mask, default gateway, DNS1 (primary DNS server), and, if necessary,
DNS2 (secondary DNS server), and then press
KX-HDV330/KX-HDV430
[In standby mode]
1.
Tap
/
→ "System Settings"
2.
Tap "Network Settings"
3.
Tap
/
→ "IPv4 Settings"
4.
Tap
/
→ "Connection Mode"
5.
Select "Static" → "OK"
6.
Enter the IP address, subnet mask, default gateway, DNS1 (primary DNS server), and, if necessary,
DNS2 (secondary DNS server), and then tap "OK".
Configuring the Network Settings Using IPv6
To configure network settings automatically using DHCP
KX-HDV130/KX-HDV230
[In standby mode]
1.
2.
[ ]/[ ]: "System Settings" →
3.
[ ]/[ ]: "Network Settings" →
4.
[ ]/[ ]: "IPv6 Settings" →
5.
[ ]/[ ]: "DHCP" →
Document Version: 2017-07
OK
OK
OK
OK
OK
OK
OK
OK
.
OK
1.1.3 Basic Network Setup
Administrator Guide
13