Value Range
Default Value
DELAY_RING_TIME_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
OFF_HOOK_MONITOR_ENABLE
Value Format
Description
Value Range
Default Value
PRIVATE_HOLD_ENABLE
Value Format
Description
Document Version: 2017-07
•
0: Original
•
1: Off
•
2: Blind (Used when performing Blind Transfer)
•
3: Park (Used when performing Call Park)
•
4: Private Hold
•
5: Call Center/Call Centre
•
6: Phonebook
•
7: Call History
•
8: Function
•
9: Flash/Recall
•
10: Call (Video Call (For KX-HDV430) or Call)
Note
The following features are applied to the soft key only when the
corresponding parameters are enabled. Otherwise, the soft key
will remain in its original setting.
–
Blind: BLIND_TRANSFER_ENABLE
–
Park: CALLPARK_KEY_ENABLE
–
Private Hold: PRIVATE_HOLD_ENABLE
0
For details about parameter names end with "_n", see
5.2.1 Configuration File Parameters
INTEGER
Specifies the length of time, in seconds, until the unit rings.
0–30
0: Disable
0
BOOLEAN
Specifies whether to enable or disable the Off-hook Monitor function.
•
Y: Enable Off-hook Monitor
•
N: Disable
Y
BOOLEAN
Specifies whether to enable or disable "Private Hold".
5.3.1 System Settings
Administrator Guide
205