Panasonic KX-HDV130 Manual page 130

4.5.4 VoIP Settings [Line 1]–[Line n]
Value Range
Default Value
Configuration File Reference
RTCP&RTCP-XR Interval
Description
Value Range
Default Value
Configuration File Reference
SRTP Mode
Description
Value Range
Default Value
Configuration File Reference
Enable Mixed SRTP & RTP by Conference
Description
Value Range
Default Value
130 Administrator Guide
•
Yes
•
No
No
RTCPXR_ENABLE_n
Specifies the interval, in seconds, between RTCP/RTCP-XR packets.
5–65535
5
RTCP_INTVL_n
Selects the mode of SRTP feature.
•
0: SRTP
•
1: RTP/SRTP
•
2: Panasonic Original
•
3: SRTP/RTP
Note
•
0: SRTP
Use only SRTP for outgoing and incoming calls.
•
1: RTP/SRTP
Use only RTP for outgoing calls, and RTP or SRTP for
incoming calls.
•
2: Panasonic Original
Use RTP or SRTP for both outgoing and incoming calls.
This value is valid only when the unit is connected to a
Panasonic PBX.
"SRTP_MIX_TRANSFER_ENABLE_n" must also be set to "Y".
•
3: SRTP/RTP
If you are using "RTP/AVP" and append "a=crypto", and the
response message includes "a=crypto", the conversation will
be established with SRTP. If "a=crypto" is not included, the
conversation will be established with RTP.
1: RTP/SRTP
SRTP_CONNECT_MODE_n
Selects whether to allow conferences where each participant can use
either SRTP or RTP.
•
Yes
•
No
No
Document Version: 2017-07