DeWalt DCB090 Instruction Manual

DeWalt DCB090 Instruction Manual

Usb power source
Hide thumbs Also See for DCB090:

Advertisement

1-800-4-D
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
DCB090
USB Power Source
Source d'alimentation USB
Fuente de alimentación USB
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
WALT • www.dewalt.com
E
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE
USAR EL PRODUCTO.

Advertisement

Table of Contents
loading

Summary of Contents for DeWalt DCB090

  • Page 1 If you have questions or comments, contact us. Pour toute question ou tout commentaire, nous contacter. Si tiene dudas o comentarios, contáctenos. 1-800-4-D WALT • www.dewalt.com INSTRUCTION MANUAL INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE GUIDE D’UTILISATION...
  • Page 2: Defi Nitions: Safety Guidelines

    • Shock hazard. Do not allow any liquid to get inside the DCB090 CAUTION: Indicates a potentially hazardous situation USB power source. Electric shock may result.
  • Page 3: Important Safety Instructions For All Battery Packs

    Important Safety Instructions for All with a nail, hit with a hammer, stepped on). Damaged battery packs should be returned to the service center for recycling. Battery Packs WARNING: Fire hazard. Do not store or carry the battery When ordering replacement battery packs, be sure to include the pack so that metal objects can contact exposed battery catalog number and voltage.
  • Page 4: Important Safety Instructions For All Battery Chargers

    The RBRC™ Seal CAUTION: Burn hazard. To reduce the risk of injury, charge only WALT rechargeable battery packs. Other types of batteries may The RBRC™ (Rechargeable Battery Recycling overheat and burst resulting in personal injury and property damage. Corp oration) Seal on the nickel cadmium, nickel metal hydride or lithium ion batteries (or battery packs) NOTICE: Under certain conditions, with the charger plugged into the indicate that the costs to recycle these batteries (or...
  • Page 5 • An extension cord must have adequate wire size (AWG • Do not disassemble the charger; take it to an authorized or American Wire Gauge) for safety. The smaller the gauge service center when service or repair is required. Incorrect number of the wire, the greater the capacity of the cable, that is, reassembly may result in a risk of electric shock, electrocution or fire.
  • Page 6: Charge Indicators

    – Increase the separation between the equipment and receiver. Indicator Light Operation – Connect the equipment into an outlet on a circuit different from PACK CHARGING that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for PACK CHARGED help.
  • Page 7: Important Charging Notes

    LEAVING THE BATTERY PACK IN THE CHARGER throughout the entire charging cycle and will not return to maximum charge rate even if the battery pack warms. The charger and battery pack can be left connected with the charge indicator showing pack charged. 4.
  • Page 8: Operation

    TO INSTALL BATTERY PACK Type A charging ports and is designed to charge or supply power to Slide the battery pack (A) into the DCB090 USB power source (B) until USB compatible devices with the use of D WALT 12 V Max* and 20 V the battery pack is firmly seated.
  • Page 9: Three Year Limited Warranty

    This warranty does not cover part failure due to normal wear or tool The DCB090 USB power source (B) is equipped with two USB abuse. For further detail of warranty coverage and warranty repair Type A charging ports (C).
  • Page 10 2 YEARS FREE SERVICE ON D WALT BATTERY PACKS DC9071, DC9091, DC9096, DC9280, DC9360, DC9180, DCB120, DCB201 and DCB203 3 YEARS FREE SERVICE ON D WALT BATTERY PACKS DCB200, DCB204 WALT BATTERY PACKS Product warranty voided if the battery pack is tampered with in any way.
  • Page 11 10,8. WALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 (JUN13) Part No. N288499 DCB090 Copyright © 2013 D WALT The following are trademarks for one or more D WALT power tools: the yellow and black color scheme; the “D” shaped air intake grill; the array of pyramids on...

Table of Contents