Sharp ER-A770 Manual page 14

3.2 02FD
No Procedure on P.C. side
1 Install "02FD.EXE" on the P.C.
ALL RAM Data UpLoad : Go to "2"
ALL RAM Data DownLoad : Go to "9"
2 ALL RAM Data UpLoad
Connect P.C. and ER-A770 (CH2) via RS232. (Fig 1)
4 Execute "02FD.EXE" on P.C.
*Don't execute the other Software at the same time.
5 Set the Communication method by "Setting" Button.
Push "OK" Button.
6 Push "Receive Start" Button.
And Select the Receiving File.
7 Communication starts.
8 UpLoad is completed.
The initial Window is shown.
Push "Exit" Button.
9 ALL RAM Data UpLoad
Connect P.C. and ER-A770 (CH2) via RS232. (Fig 1)
No Procedure on ER-A770 side
Enter the SRV mode.
2 Select " 2 SETTING ".
Select " 14 BACKUP SEND"
3 ER-A770 shows
BACKUP SEND
SEND DATA
SPEED
7 Push TL key. ER-A770 shows
SENDING
8 UpLoad is completed.
The SETTING menu is shown.
9 Enter the SRV mode.
Select " 2 SETTING".
Select " 15 BACKUP RECEIVE"
10
ER-A770 shows
BACKUP RECEIVE
SPEED
Push TL key.
ALL RAM
PROGRAMMED SPEED
00000
PROGRAMMED SPEED