G20 Quick Reference Medical Note: The term select is used to describe the action of rolling the trackball to position the pointer (cursor) on an object and then pressing SET on the control panel. Beginning an Exam Press the Power Switch on the upper left side of the keyboard. A blue light will indicate the power is on. To enter data for a new patient: 1.
G20 Quick Reference Medical Adding Text to an Image To type text: To Use Pre Programmed Text 1. Obtain an image, press Freeze Press TEXT 2. Press the TEXT key Press MENU 3. Place green text cursor where you would like text Use TRACKBALL to select the desired text from menu displayed list...
Page 4
G20 Quick Reference Medical Obtaining OB Calculations Standard Fetal Measurements: 1. Press CALIPER key 2. Use TRACKBALL to select measurement from on-screen menu 3. Press SET 4. Place first caliper 5. Press SET 6. Place subsequent caliper(s) 7. Press Set Measurement will be displayed on screen and transferred to Worksheet Measure Heart Rate with M- Mode: 1.
Page 5
G20 Quick Reference Medical Reviewing and Selecting Images/Studies on DIMAQ Press REVIEW on the control panel Do this: To Select Using TRACKBALL position cursor on image and press An image on Image Screen SET key A study on Study Screen ...