Siemens SONOLINE G20 Maintenance Instruction
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Medical Equipment
  5. Sonoline G20
  6. Maintenance instruction

Siemens SONOLINE G20 Maintenance Instruction

System care and pm procedure
Hide thumbs Also See for SONOLINE G20:
Table of Contents

Advertisement

Quick Links

SONOLINE G20
Maintenance Instructions
System
System Care and PM Procedure
The protocol US06-102.832.01.01.02 is required for
these instructions
08647831
08647815
ejt
Ultrasound Division
Siemens Medical Solutions
Print No.:
US06-102.831.01.01.02
Replaces: n.a.
Part No.: n.a.
sd
US
2004
© Siemens AG
The reproduction, transmission or use
of this document or its contents is not
permitted
without
express
written
authority. Offenders will be liable for
damages. All rights, including rights
created by patent grant or registration
of a utility model or design, are
reserved.
English
Doc. Gen. Date: 10.05
n.a.

Advertisement

Table of Contents
loading

Related Manuals for Siemens SONOLINE G20

Summary of Contents for Siemens SONOLINE G20

  • Page 1 SONOLINE G20 Maintenance Instructions System System Care and PM Procedure The protocol US06-102.832.01.01.02 is required for these instructions 08647815 08647831 2004 © Siemens AG The reproduction, transmission or use of this document or its contents is not permitted without express written authority.
  • Page 2 Assemblers and other persons who are not employed by or otherwise directly affiliated with or authorized by Siemens or one of its affiliates are directed to contact one of the local offices of Siemens or one of its affiliates before attempting installation or service pro- cedures.
  • Page 3 Buyer with respect to software supplied by such supplier, and (ii) No supplier of Siemens shall be liable to buyer for any general, special, direct, indi- rect, consequential, incidental or other damages arising out of the sublicense of the com- puter programs supplied with the equipment.

  • Page 4: Table Of Contents

    Siemens Authorized Care ........
  • Page 5 Perform inspections and maintenance at the prescribed intervals to avoid worn and haz- ardous parts due to wear. Contact the Siemens Uptime Center for information regarding required maintenance. As manufactures of ultrasound equipment, Siemens cannot assume responsibility for the safety properties, reliability, and/or performance of equip- ment, if: •...
  • Page 6 The equipment is not used in accordance with the operation instructions. • The system is operated by personnel not adequately educated or trained. Siemens suggests that the person performing maintenance or repairs provide a certificate showing: • The nature and extent of the work performed •...

  • Page 7: Daily Inspection

    If the system power cord is frayed, split, or shows signs of wear, WARNING contact your Siemens service representative for power cord re- placement. A damaged power cord can lead to a safety hazard.

  • Page 8: Siemens Authorized Care

    System Care and Preventive Maintenance 1.1.2 Siemens Authorized Care Delivery personnel, service personnel, and operators must observe any statutory regula- tions that govern the delivery, inspection, and maintenance of this equipment. To ensure the safety of patients, operators, and third parties, the equipment must be inspected every 12 months, and the replacement of parts performed as necessary.

  • Page 9: Preventive Maintenance Procedure

    If the system power cord is frayed, split, or shows signs of wear, WARNING contact your Siemens service representative for power cord re- placement. A damaged power cord can lead to a safety hazard.

  • Page 10: Maintenance Checks

    1.2.5 Peripheral Device Check Always check Siemens-approved peripheral devices (OEMs), even if the customer has not signed a maintenance contract for them. The check includes cleaning and optimization of settings if necessary. Replacement depends upon the type of maintenance contract. For information about operating and cleaning of OEM peripheral devices, refer to the respec- tive OEM operating instructions.

  • Page 11: Concluding The Maintenance

    Refer to the OEM operat- ing instructions for detailed information on optimizing printer settings. 2. Check other installed Siemens-approved OEM equipment. If necessary, clean the OEM, and optimize the settings. 1.2.6 Concluding the Maintenance 1.
  • Page 12 System Care and Preventive Maintenance SONOLINE G20 US06-102.831.01.01.02 Siemens Page 12 of 12 10.05 Medical Solutions USA, Inc.

Table of Contents