Bb Adc Readings; Audio Testing - Nokia 616 Service Manual

Nokia Customer Care
BB ADC-Readings
Test description:
Open the ADC Reading Test Menu from the Testing drop down menu.
Perform the Test:
There are no Base band Alignments to be done, only the AD-Values should be read out to
check if the inputs of the AD-Converter have the right levels. The BSI and BTEMP line can
be checked with the Local-Mode switch and the VEB-Power (replacement for the Phone
battery) voltage can be read out. To control this value the real Voltage should be con-
trolled by Voltage-Meter. The Testing Limits can be seen in Table below:
AD Channel
BSI
BTEMP
VBAT

Audio Testing

Test description:
STEP 1:
-Activate Local Mode
Issue 2.0 Mar/2005
Figure 3: ADC-Readings
Local Switch
Normal
XXX
XXX
Prepare Phoenix and Phone:
Copyright © 2005 Nokia Corporation
Company Confidential
3 - Service Software
Low
44kR 49kR
FLS-4S: 3K FLS-4S: 9K
23°C
4,1V
TFE-4/RV-1
High
27°C
4,4V
Page 3-33