Yamaha DM2000 Orientation Manual page 5

Assign Channel to Aux Output
1. Select the channel
2. On SELECTED CHANNEL / AUX/MATRIX, press [ON] switches
as needed.
3. Adjust send [LEVEL] rotary encoder (pot) as needed.
4. Press [BANK] as needed to select other sends.
Set Channel Pan Position
1. Select the channel.
2. On SELECTED CHANNEL / PANSURROUND, adjust [PAN] knob
as needed.
Set Input Delay
1. Select the channel
2. On SELECTED CHANNEL / DELAY, press [ON] button if unlit.
3. Adjust [TIME] knob as needed.
Set Input Gate
1. Select the channel.
2. On SELECTED CHANNEL / DYNAMICS, press [GATE ON] button
if unlit.
3. On SELECTED CHANNEL / DYNAMICS, press [DISPLAY].
4. Keep pressing this button to locate "Gate Library" page.
5. Recall program desired and edit if needed...
OR...
1. Select the channel
2. On SELECTED CHANNEL / DYNAMICS, press [GATE ON] button
if unlit.
3. Press [GATE/COMP] to light [GATE] indicator.
4. Adjust [THRESHOLD] [RANGE] [ATTACK] [DECAY] [HOLD] as
needed.