Step 5: Enable Email Notifications (Optional) - Ruckus Wireless SmartZone 100 Administrator's Manual

Figure 108. The Time Filter section

Step 5: Enable Email Notifications (Optional)

In this optional step, you can configure the controller to send email notifications
whenever a report has been generated. Configure the following in the Email
Notification section.
NOTE: Make sure you configure the SMTP settings (see
Email Server). If the SMTP settings are not configured, the controller will be unable
to send out email notifications even if you enable this feature in this section.
1 In the Email Notification section, click the Enable button.
2 In the text box below, type the email address to which to send the notification.
3 To add another email address, click Add New, and then type the second email
address in the text box that appears.
NOTE: You can add as many email addresses as needed by clicking the Add New
button, and then typing an additional email address. Note, though, that you must
only type a single email address in each text box.
4 Continue to
SmartZone 100 Administrator Guide for RuckOS 3.1, 800-70827-001 Rev B
Step 6: Export the Report to an FTP Server
Creating a New Report
Step 5: Enable Email Notifications (Optional)
Configuring an External
(Optional).
211