Managing Radius Servers For Administrator Authentication; Adding A Radius Server For Administrator Authentication - Ruckus Wireless SmartZone 100 Administrator's Manual

Managing RADIUS Servers for Administrator
Authentication
You can add RADIUS servers that you want to use for authorizing and authenticating
administrators.
In this section:
•

Adding a RADIUS Server for Administrator Authentication

• Using a Backup RADIUS Server
Adding a RADIUS Server for Administrator
Authentication
Follow these steps to add a RADIUS server that the controller can use for authen-
ticating administrators.
NOTE: If you want to use a primary and secondary RADIUS servers for
authenticating administrator, follow the steps in
1 Go to Configuration > SmartZone Administrators > AAA for Administrators.
2 Click Create New. The Create New Administrator RADIUS Server form appears.
3 In Name, type a name for the RADIUS server.
4 In Type, select the type of RADIUS server that you are using. Options include:
• RADIUS: Click this option to use a Remote Authentication Dial-In User
Service (RADIUS) server on the network for authenticating controller admin-
istrators.
• TACACS+: Click this option to use a Terminal Access Controller Access-
Control System Plus (TACACS+) server on the network for authentication
controller administrators.
5 In Realm, type the realm (or realms) to which the RADIUS server belongs. If the
RADIUS server belongs to multiple realms, use a comma (,) to separate the realm
names.
6 Make sure that the Enable backup RADIUS support check box is not selected.
If you want to use a backup RADIUS server, follow the steps in
RADIUS Server
7 In IP Address, type the IP address of the RADIUS server.
8 In Port, type the UDP port that the RADIUS server is using. The default port is
1812.
SmartZone 100 Administrator Guide for RuckOS 3.1, 800-70827-001 Rev B

Managing RADIUS Servers for Administrator Authentication

instead.
Adding a RADIUS Server for Administrator Authentication
Using a Backup RADIUS Server.
Using a Backup
168