Creating And Configuring Static Routes - Ruckus Wireless SmartZone 100 Administrator's Manual

4 Click Save.
5 Click Apply.
You have completed configuring the user defined interface settings.
Figure 60. The User Defined Interface tab

Creating and Configuring Static Routes

To configure a static route, enter the destination IP address and related information
for the destination. You can also assign a metric (or priority) to help the controller
determines the route to choose when there are multiple routes to the same
destination.
Follow these steps to configure a static route.
1 Click the Static Routes tab.
2 Click the Create New button.
3 Configure the following interface settings:
a Network Address: Enter the destination IP address of this route.
b Subnet Mask: Enter a subnet mask for the IP address above.
c Gateway: Enter the IP address of the gateway router.
d Interface: Select the physical interface to use for this route.
SmartZone 100 Administrator Guide for RuckOS 3.1, 800-70827-001 Rev B
Configuring Network Settings
Creating and Configuring Static Routes
132