Samsung SDR-B85300 Quick Start Manual page 3

4.
Basic System Configuration- You can set date, time, date format, time
format, language, video format and menu timeouts.
5.
Network Setup (DHCP). In DHCP mode, the router will automatically allo-
cate IP address to the DVR. If the DVR fails to obtain an IP address, refer
to the DVR Router Guide. If the problem still cannot be resolved, contact
technical support.
6.
Email Setting. Receive or Send DVR alarm email and set parameters like
email address, SSL, email enable, and interval.
• Encryption: Disable, SSL, TLS and Auto optional. Auto means it can
detect the encryption type automatically. It is recommended to set the
encryption type as Auto.
• SMTP Port: Mail sending port used by SMTP (Simple Mail Transfer
Protocol). Server is generally Port 25 or Port 465 when SSL is used by
Gmail.
• SMTP Server: Enter the address of the server for the mailbox in use.
• User Name: Enter a server to connect to. For example, email "aaa@
gmail.com" should correspond to server "smtp.gmail.com"
• Password: Enter the password of the SMTP server user.
• Sender Address: Sender's email address, which must correspond to the server used. For example, email "aaa@gmail.
com" should correspond to server "smtp.gmail.com".
• Receiver 1/2/3: Recipient's mail address, used to receive alarm image and message from DVR side. If system alarms
continually and sends email images frequently, save the images to another location or remove them, so as to avoid
excessive space occupation and thereby affect your normal use of mailbox.
• Time Interval: A mail will be sent every three minutes by default. If the time interval for mail notification is set too short,
email server may deem mails as junk mails, so they cannot be transferred normally.
• Click on "Test Email". If connection succeeds "Test E-mail" will be sent out.
_3
English