Setting Mode (08) - Toshiba e-STUDIO6520C Service Handbook

2.6

SETTING MODE (08)

The items in the setting code list can be set or changed in this setting mode (08).Turn ON the power
with pressing the digital keys [0] and [8] simultaneously in order to enter this mode.
Note:
When the power should be turned OFF, be sure to shut down the equipment by pressing the
[ON/OFF] button for a few seconds.
Remarks:
• The Service Handbook contains only the selected codes while the Service Manual contains
all codes.
• The digit after the hyphen in "Code" of the following table is a sub code.
• In "RAM", the SRAM of the board in which the data of each code is stored is indicated. "M"
stands for the LGC board, "SYS", "NIC" and "UTY" stands for the SYS board.
2.6.1 Classification List of Setting Mode (08)
Classification
[ACS]
[AMS]
[Feeding paper media]
[X in 1]
[Color specification]
[Indicator]
[Edit copying]
[Sound]
[Counter]
[Cascade]
[ACS]
[Screen]
[Administrator]
[Feeding setting]
User interface
[Language]
[Original counter]
[Original direction]
[Copy volume]
[Automatic calibration]
[Default setting]
[Jam releasing]
[Offsetting between jobs]
[Security level]
[Sorting]
[Timer]
e-STUDIO5520C/6520C/6530C
SELF-DIAGNOSTIC MODE
Setting Mode (08)
Given in
the Service Manual
9698
605
9185-0 to 1
650
643, 644
671
645, 646
610, 969, 970
202
652, 653
268
207, 602, 983, 9985
263, 9882
658, 659
220, 221, 1929, 1930, 1931,
1932, 1933, 1935
302
628
300
632
276, 277, 278, 279, 280, 281,
282, 283, 284, 285, 286, 289,
331, 603, 604, 607, 618, 642,
9986
9359
682
1708
627, 634, 641, 649
204, 205, 206
© 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
2 - 116
Given in the
Service Manual and
Service Handbook