Setting Mode (08) (E-Studio200L/230/230L/280) - Toshiba e-studio200l Service Handbook

2.2.7

Setting mode (08) (e-STUDIO200L/230/230L/280)

The items in the setting code list can be set or changed in this setting mode (08).
Procedure 1
[0][8] [Digital key]
[POWER] (Code)
* Press [FUNCTION CLEAR] to enter minus (-).
Procedure 2
[0][8] [Digital key]
[POWER] (Code)
Procedure 3
[0][8] [Digital key]
[POWER] (Code)
[CANCEL] or [CLEAR]
Procedure 4
[0][8] [Digital key]
[POWER] (Code)
* Press [FUNCTION CLEAR] to enter minus (-).
Procedure 5
[0][8] [Digital key]
[POWER] (Code)
* Press [HELP] to enter "-".
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
ERROR CODE AND SELF-DIAGNOSTIC MODE
[CANCEL]
[Digital key]
[START]
*[FUNCTION CLEAR]
Sets or
changes value
[START]
Adjustment value
cannot be changed
[ENTER]
[START]
[INTERRUPT]
(Stores value in RAM)
[CANCEL]
[START]
[Digital key]
[START] [START]
(Sub-code)
[CLEAR]
(Corrects value)
[CANCEL]
[Digital key]
[START]
*[HELP]
Sets or
changes value
[ENTER]
or
[INTERRUPT]
(Stores value in RAM)
[CLEAR]
(Corrects value)
[ENTER]
[POWER]OFF/ON
or
[INTERRUPT]
or (Automatic setting)
[Digital key]
* [FUNCTION CLEAR]
Sets or
changes value
[CLEAR]
(Corrects value)
[ENTER]
or
[INTERRUPT]
(Stores value in RAM)
[CLEAR]
(Corrects value)
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
2 - 84
10/06
[POWER] OFF/ON
(Exit)
(Exit)
[POWER] OFF/ON
(Exit)
[ENTER] [POWER]
or OFF/ON
[INTERRUPT] (Exit)
(Stores value
in RAM)
[POWER] OFF/ON
(Exit)