Panasonic KX-NS1000 Installation Manual page 64

Pure ip-pbx
Hide thumbs Also See for KX-NS1000:
Table of Contents

Advertisement

2.3.3 System Capacity
Terminal Equipment Type
DSS Console
CS
PT-interface CS (2-channel)/CS for CSIF card
PT-interface CS (8-channel)
IP-CS
PS
Voice Processing System (VPS)
Doorphone
Door Opener
External Sensor
External Relay
*1
To install more than 512 DPTs, additional DPTs must be connected via a Digital XDP connection.
*2
IP terminals, except for KX-NT265 (software version 2.00 or later only), are registered and controlled by the KX-NS1000.
One 8-channel PT-interface CS counts as 2 CSs for the total number of CSs.
*3
*4
The maximum number of Air Sync Groups is 16. An Air Sync Group can contain up to 16 IP-CSs.
The maximum number of LAN Sync Groups is 16. A LAN Sync Group can contain up to 64 IP-CSs (KX-NS0154 only).
Note for KX-NT265 IP-PT users
The supported card varies depending on the software version of your KX-NT265 IP-PT. To confirm the version,
follow the procedure below:
While starting up
PROGRAM
Select
"Maintenance".
SP-PHONE
Maximum Terminal Equipment with KX-NS700
The maximum number of CO lines and extensions supported by each type of PBX is the same as when the
unit is used as a standalone unit. For details, refer to the Installation Manual of the corresponding PBX.
Note
For details about the maximum capacity of a One-look network, refer to "Maximum Terminal Equipment"
in "2.3.3 System Capacity".
64
Installation Manual
*3
SP-PHONE
Select
"Version display".
To exit the programming mode
Software version
HOLD
is displayed.
One-look Network
64
128
128
64
128
*4
512
8
80
80
80
80
SP-PHONE
"AP Version".
HOLD
HOLD
HOLD
Document Version 2016-03

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents