One-Numbered Extension - Panasonic KX-NS1000 Feature Manual

14.1.7 One-numbered Extension

14.1.7 One-numbered Extension
Description
It is possible to share one extension number between a main extension and a sub extension as a paired
extension. The sub extension that is paired with the main extension can be called simultaneously by the
extension number of the main extension (paired main extension number). When an incoming call is received
at the main extension, it is treated as a call for the paired main extension number and the incoming call will
arrive at the sub extension simultaneously.
A user can pick up the call for the paired extension by entering the corresponding feature number or pressing
the corresponding flexible button. However, if one of the extensions is in a conference call, the other extension
cannot pick up the call.
Conditions
•
The following extensions can be assigned as a main/sub extension.
PT, SLT, T1-OPX extension, and SIP extension (including KX-UT series SIP phones and general SIP
phones)
* For KX-UT series SIP phones and general SIP phones
The no-ring or delayed ringing features are not activated when a new call is received at a paired extension
during a call. In this case, the telephone will ring normally.
•
The paired main extension number is displayed on the sub extension when the telephone is idle. However,
for KX-UT series SIP phones and general SIP phones, the original extension number is displayed on the
sub extension when the telephone is idle.
•
If a main extension is already configured with Wireless XDP or paired with one-numbered extension, the
main extension cannot be paired with another sub extension.
•
The sub extension operates according to the COS and extension settings of the main extension (except
key settings, incoming line preference, and outgoing line preference).
•
When calling from a sub extension, the caller information (extension number, extension Name, CLIP/CNIP)
of the paired main extension number is used.
•
When an incoming call is received at a one-numbered extension, the behavior differs depending on the
type of telephone, as follows:
[KX-NT series/DPT]
•
If the main extension is busy and there is a flexible button available to receive the call, the call waiting
feature can function.
•
If the main extension cannot receive the incoming call, the call waiting feature will not function.
[SLT]
•
If the main extension is an SLT and is busy, the sub extension cannot receive the call.
[KX-UT series]
•
If the main extension is a KX-UT series SIP phone and the sub extension is an SLT or a KX-UT series
SIP phone, the sub extension cannot receive calls while the main extension is busy.
•
If the main extension is a KX-UT series SIP phone, neither the main extension nor the sub extension
can receive calls. This condition applies regardless of the type of telephone used for the sub extension.
•
When making an extension call to a paired main extension number using voice-calling, a ring tone is heard
at the sub extension.
•
When a call is received to a paired main extension number in LCS with Hands-free mode, the call will not
be received at a sub extension.
•
The following features are available only at the main extension.
–
OHCA (® 14.1.3 OHCA (Off-hook Call Announcement))
–
Whisper OHCA (® 22.1.5 Whisper OHCA)
•
When a paired main extension number is paged, the sub extension will not be paged. (® 15.1.1 Paging)
•
When a paired main extension number is called for a conference, the call will also arrive at the sub
extension.
248 Feature Manual Document Version 2016-03