Panasonic KX-NS1000 Feature Manual page 227

[Explanation]
Number in the
Example
(1)
(2)
When the PBX in a One-look network enters Isolated Mode or Backup Master Mode, the System Alarm button
on PTs lights up. Press the System Alarm button to display the current status of the PBX on the LCD.
Conditions
•
System Alarm Button
Any flexible button can be customized as the System Alarm button.
•
The alarm information will be logged on the Station Message Detail Recording (SMDR), if enabled through
system programming.
•
The PBX can be automatically diagnosed at a preprogrammed time every day.
Installation Manual References
7.1.6 Troubleshooting by Error Log
8.4.2 One-look Networking Survivability
PC Programming Manual References
7.3.1 Utility—Log—Error Log
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button—
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button—
19.1 PBX Configuration—[11-1] Maintenance—Main
→SMDR— Print Information—Error Log
→Maintenance—
→Maintenance—
→Maintenance—
→Maintenance—
Feature Manual References
7.1.3 Flexible Buttons
18.1.6 SMDR (Station Message Detail Recording)
Document Version 2016-03
Item
Error Code Shows three-digit error code.
Sub Code Shows 8-digit sub code (BBWXYYZZ).
BB: Site number (00 to 15)
W: Slot type (Physical shelf: blank, Virtual shelf: *)
X: Unit number/Non-PBX process code
YY: Slot number/Process code
ZZ: Port number/Process number
Local Alarm Display—Extension 1, Extension 2
Daily Test Start Time—Set
Daily Test Start Time—Hour
Daily Test Start Time—Minute
12.1.4 Local Alarm Information
Description
Type
Type
Feature Manual 227