Panasonic KX-NS1000 Feature Manual page 2

Introduction
Introduction
About the Feature Manual
The Feature Manual is designed to serve as an overall reference describing the features of the Panasonic
Pure IP-PBX. It explains what the PBX can do, as well as how to obtain the most of its many features and
facilities.
The Feature Manual is divided into the following sections:
Section 1, For Your Safety
Provides important information about operating the PBX safely and securely.
Sections 2 to 22, Features and Configurations
Describes the call handling, system configuration and administration features of the PBX.
Section 23, Appendix
Provides tables listing capacity of system resources, exclusive features for each PBX model, tone and ring
tone tables, and the revision history of this Feature Manual.
Compatible Telephones and Devices
A list of telephone and device types that are compatible with this PBX can be found in the Installation Manual.
However, if you expand the capabilities of this PBX by connecting KX-NCP/KX-TDE/KX-TDA series PBXs, the
following types of telephones, devices, and CO lines can also be used:
•
Digital Proprietary Telephones (DPT)
•
Analog Proprietary Telephones (APT)
•
Direct Station Selection Consoles (DSS Consoles)
•
T1 off-premise extensions (T1-OPX)
•
Voice Processing Systems (VPS)
•
T1 CO lines
•
ELCOT CO lines (KX-TDE600/KX-TDA600 only)
These types of telephones, devices, and CO lines are listed in the manual for various features. However, be
aware that they are only applicable if a stacking connection is established. For details about stacking, see
"18.1.11 Stacking Connection".
Functional Limitation
Depending on the PBX's software version, some features may not function. For details about which versions
support these features, consult your dealer.
The feature (explained below) that displays the registered name on the second line of a display PT's LCD is
supported by the following models only:
•
KX-NT543 / KX-NT546 / KX-NT553 / KX-NT556 / KX-NT560
•
KX-DT543 / KX-DT546
If a name is registered in the Personal Speed Dialing Directory or System Speed Dialing Directory, it is
displayed on the second line of a display PT's LCD when you make a call to that directory entry in one of the
following ways:
1.
When you make a CO line call using that directory.
2.
When you use the REDIAL button to redial the number dialed in 1.
3.
When you use the Outgoing Call Log to redial the number dialed in 1.
This limitation applies to the following manuals and chapters.
Feature Manual
•
17.1.1 Redial, Last Number
2 Feature Manual Document Version 2016-03