Regulatory Compliance Information; Ce Mark Compliance; Restriction Of Hazardous Substances (Rohs) - GE Multilin D400 Instruction Manual

Substation gateway
Hide thumbs Also See for Multilin D400:
Table of Contents

Advertisement

CHAPTER 1: BEFORE YOU START

Regulatory compliance information

CE Mark compliance

Restriction of Hazardous Substances (RoHS)

GE part
Description
number
500-0340LF Chassis Assembly
520-0190
Power Supply Blank Assembly
520-0191
Adapter Blank Assembly
520-0204
650 MHz Celeron w Single Ethernet
520-0205LF 1.0 GHz Celeron w Single Ethernet
520-0232LF 1.6 GHz CPU (Atom)
520-0206LF USB KVM Assembly
520-0207LF RS-232 IO Assembly
520-0208LF RS-485 IO Assembly
520-0209LF Glass Fiber Optic IO Assembly
520-0210LF Plastic Fiber Optic IO Assembly
520-0211LF IRIG-B Input Assembly
520-0212LF IRIG-B Distribution Assembly
520-0213LF Ethernet 4 Port Switch Assembly
D400 SUBSTATION GATEWAY INSTRUCTION MANUAL
The D400 is rated as CISPR 11 Group 1 Class "A" equipment.
To provide higher EMC immunity and maintain CE Mark compliance, the serial cables used
for permanent RS-232 and RS-485 connections must comply with the following
requirements:
Cables must be shielded
D type connector covers must provide EMC shielding (e.g. metallized plastic or die cast
metal covers) for permanently connected RS-232 cables
Class "A" equipment is intended for use in an industrial environment. The equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with these instructions, may cause interference to other devices in the vicinity.
If this equipment does cause interference with other devices, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving device
Increase the separation between the equipment
Connect the equipment into an outlet on a circuit different from that to which the
other device(s) is connected
Consult the manufacturer or field service technician for help
The environmental protection use period (EPUP), as defined in PRC SJ/T11363-
2006, for the D400 hardware assemblies listed in Table 2, is in excess of 20
years.
Table 2: RoHS Material Declaration Data Content by Assembly
Lead
(Pb)
O
O
O
X
O
O
O
O
O
O
O
O
O
O
GE INFORMATION
Mercury
Cadmium
Hexavalent
(Hg)
(Cd)
Chromium
(Cr6)
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Polybromina
Polybrominated
ted biphenyls
diphenyl ethers
(PBB)
(PBDE)
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents