164
Figure 64: Dual Ethernet upgrade kit - four mounting holes
4.
Plug the first provided cable assembly (GE part number 977-0544) into connector
LAN2 and LED2 on PC/104 card and connector P3 on the main board.
5.
Plug the second provided cable assembly (GE part number 975-0549) into connector
LAN1 and LED1 on PC/104 card and connector J7 on the main board.
6.
Confirm all shunts on: JP1 are in position 2-3; JP2 are not installed; JP3 are in position
1-2; JP4 are not installed. Figure 65 shows the shunt positions on the 580-3410 card.
Figure 65: Dual Ethernet upgrade card 580-3410 - jumper settings
GE INFORMATION
CHAPTER 13: SERVICING THE D400
D400 SUBSTATION GATEWAY INSTRUCTION MANUAL