GE Multilin D400 Instruction Manual page 152

152
Setting Description
Check and rsync The amount of time, in seconds, that the
Interval Sync Manager waits before checking the
source path for changes. If changed or
created files are detected, an rsync
operation is triggered.
Forced rsync The amount of time, in seconds, that the
Interval Sync Manager waits before a forced rsync
operation is triggered, regardless of
detected changes.
This recreates files that have been deleted
from the remote device as well as forcing
the transfer of files whose changes may not
have been detected due to MD5 collision, an
extremely rare occurrence.
Table 44: Sync Set Example 1
Field
Sync Set ID
Destination IP Address
Destination User Name
Source Path Name
Destination Path Name
Check and rsync Interval
Forced rsync Interval
Table 45: Sync Set Example 2
Field
Sync Set ID
Destination IP Address
Destination User Name
Source Path Name
Destination Path Name
Check and rsync Interval
Forced rsync Interval
GE INFORMATION
CHAPTER 12: USING THE D400 LOCAL CONFIGURATION UTILITY
Value
1
192.1681.1
admin
/mnt/datalog/arrm
/cygdrive/c/Stations_Data
60
60
Value
2
192.1681.2
admin
/mnt/datalog/arrm
/cygdrive/c/Stations_Data/GW/Station_1/
D400_Name_1%D400_DESIGNATION
Where, %D400_DESIGNATION is the place holder for D400
Designation i.e. _A or _B.
For the above example, the destination path is:
For D400A:
/cygdrive/c/Stations_Data/GW/Station_1/D400_Name_1 _A
For D400B:
/cygdrive/c/Stations_Data/GW/Station_1/D400_Name_1 _B
60
60
D400 SUBSTATION GATEWAY INSTRUCTION MANUAL
Range
60 to 86400 seconds
60 to 86400 seconds