DeWalt DCT412 Original Instructions Manual page 47

5. Press the OK button to save changes.
6. Press the main menu button to exit.
To Format Micro SD Card
NOTICE: Formatting the micro SD
card will erase all data.
1. Press the main menu button to show the Main
Menu.
2. Press the forward or back arrow to select the
Format Disk option.
3. Press the OK button to navigate to the next
screen.
4. Press the forward or back arrow to select NO or
YES.
5. Press the OK button to save changes and exit.
To Change Default Setup
NOTICE: Changing to default setup
will erase current settings and
restore factory settings.
1. Press the main menu button to show the Main
Menu.
2. Press the forward or back arrow to select the
Default Setup option.
3. Press the OK button to navigate to the next
screen.
4. Press the forward or back arrow to select NO or
YES.
5. Press the OK button to save changes and exit.
Operating Tips
• Use only D WALT 10.8 V lithium ion battery.
E
• Ensure the D WALT battery is in good working
E
condition. If the low battery indicator light on
the screen is flashing, the battery needs to be
recharged.
• To extend battery life, make sure to turn both
the screen and the handle set off when not in
use.
• Make sure the screen is fully charged before
operation.
MAINTENANCE
Your D WALT inspection camera has been designed
E
to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and
regular cleaning.
EN GL IS H
45