Grounding The Printer; Disconnecting The Power Supply - Epson TM-U295 Installation Manual

English

Grounding the Printer

You need an appropriate ground wire to ground your printer.
Recommended wire is described below.
Wire thickness:
Diameter of terminal to be attached to: 3.2
1. Make sure that the printer is turned off.
2. Tighten the ground wire in the position indicated as "FG" on
the back of the printer with the FG screw, as shown.
Connecting the Power Supply
This printer requires an external power supply. Use an optional
Epson power supply.
CAUTION:
Using an incorrect power supply can cause serious damage to the
printer.
1. Make sure that the printer is turned off.
2. Plug the power supply's DC cable connector into the printer's
connector as shown below. Note that the flat side of the DC
cable connector faces up.
3. Plug the power plug of the power supply into an outlet.

Disconnecting the Power Supply

1. Turn off the printer.
8 TM-U295 Installation Manual
AWG 18 or equivalent