Printer Parts
printer cover
POWER switch
DIP switch
Control Panel
The control panel has three buttons and three indicators (LEDs).
Buttons
All three of these buttons can be disabled or enabled by the ESC c 5
command.
FORWARD
Feeds the paper forward based on the line feed amount set by ESC
2 and ESC 3.
REVERSE
Feeds the paper backward based on the line feed amount set by
ESC 2 and ESC 3.
RELEASE
Pressing this button moves the rollers so that paper can be inserted
or removed. (This state is called the "paper release mode.")
Note:
Pressing the POWER switch while holding down the RELEASE button runs a
self test. See "Running a Self Test."
upper case
document table
FG
interface connector
TM-U295 Installation Manual 5
control panel
power connector
English