The product packages are as shown in the figure below. Check they contain all components.
Monitor
[SVD-4332 Series]
SVD-4332
Door Camera
[Optional]
SVC - 0270P
SVC - 0271M
SVC - 0270M
26
Sub Monitor
Check This First!
The power does not turn on.
Make sure if the power is connected.
The screen is too dark.
Check the condition of the exterior lighting in the area of the camera.
Clean the exterior surface of the door camera.
Adjust the screen brightness in the function settings. (refer to page 9)
The screen brightness settings consist of 4 phases and factory default set is 2.
There is too much noise during calls.
Check to see if the door phone line has been short-circuited with the ground.
Calls are not audible.
Check the volume setting.
Check the wire connection between the monitor and the camera.
27