Setting The Open Time; Setting The Call Time; Setting The Talk Time; Setting The Nand Flash Bulk Check - Samsung SVD-4332 User Manual

These functions are used to customize some product functions in the user's environment.

Setting the Open Time

Set to the door lock open time for the Door1/2 port's door open function.
1. During the Supervisor setting mode, press the SET button repeatedly to select 7.DOOR1 OPEN TIME
SET or 8.DOOR2 OPEN TIME SET.
2. Press the + / - buttons repeatedly to select the desired time (1SEC ~ 10SEC).
3. Press the Interphone button to store your setting.
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
After connecting to the door lock to the DOOR1/2 port, be sure set to the door open time on the 7/8.DOOR1/2 OPEN
TIME item.

Setting the Call Time

Set to the each call time limit for the Door1/2 or slave port's.
1. During the Supervisor setting mode, press the SET button repeatedly to select the 9.DOOR1 CALL TIME
SET, A.DOOR2 CALL TIME SET or B.SLAVE CALL TIME SET.
2. Press the + and - buttons repeatedly to select the desired time (15SEC ~ 10MIN).
3. Press the Interphone button to store your setting.
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
After connecting to the DOOR1/2 or SLAVE port, be sure set to the call time limit on the 9/A.DOOR1/2 CALL TIME
SET and B.SLAVE CALL TIME SET item.
If a call is not made within the DOOR1/2's call time limit, the visitor's image is recorded/stored automatically.
14

Setting the Talk Time

Set to the each talk time limit for the Door1/2 or slave port's.
1. During the Supervisor setting mode, press the SET button repeatedly to select the C.DOOR1 TALK TIME
2. Press the + / - buttons repeatedly to select the desired time (30SEC ~ 1HOUR).
3. Press the Interphone button to store your setting.
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---

Setting the NAND Flash Bulk Check

Set to the NAND flash bulk check function enable or disable.
1. During the Supervisor setting mode, press the SET button repeatedly to select the M.NAND BULK
2. Press the + and - buttons repeatedly to select the YES or NO.
3. Press the Interphone button to store your setting.
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
SET, D.DOOR2 TALK TIME SET or E.SLAVE TALK TIME SET .
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
After connecting to the DOOR1/2 or SLAVE port, be sure set to the talk time limit on the C/D.DOOR1/2 TALK TIME SET
and E.SLAVE CALL TIME SET item.
When the DOOR1 port is connected to door bell, the C.DOOR1 TALK TIME SET is not activated.
ADJUST.
Yes : Activate the NAND flash bulk check function
No : Disable the NAND flash bulk check function
If the M.NAND BULK ADJUST set to YES, the unit will start NAND flash bulk checking
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
for more than 7 minutes.
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
15