Setting The Video Mode; Initializing The Supervisor Mode; Setting The Chroma Delay; Setting The Stroage Image Number - Samsung SVD-4332 User Manual

These functions are used to customize some product functions in the user's environment.

Setting the Video mode

Set to the video signal scanning type for door camera1/2.
1. During the Supervisor setting mode, press the SET button repeatedly to select the N.VIDEO MODE
SELECT.
2. Press the + / - buttons repeatedly to select the NTSC or PAL.
3. Press the Interphone button to store your setting.
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
After connecting to the DOOR1/2 port to camera (lobby), be sure set to the camera's video signal scanning type on the
N.VIDEO MODE SELECT item.
When the DOOR1 and DOOR2 port are connected to cameras, the both camera device's video signal type are same mode,
otherwise display will be abnormal.

Initializing the Supervisor mode

1. During the Supervisor setting mode, press the SET button repeatedly to select the O.SUPERVISOR
DEFAULT.
2. Press the + / - buttons repeatedly to select the YES or NO.
Yes : Perform the initialization No : Cancel the initialization
3. Press the Interphone button to store your setting.
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
Supervisor Default setting values
- Door2 open time
- ID MASTER
- Door1 call time
- Camera Quantity 1
- Door2 call time
- Bell set Release
- Slave call time
- Multi lobby Release
- Door1 talk time
- Door1 open Main
- Door2 talk time
- Door2 Open Main
- Slave talk time
- Door1 open time 1sec
16
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1sec - Nand bulk adjust no
1min - Video mode NTSC
1min - Indicate LED OFF
1min - Chroma delay 1sec
3min - Storage image num 128
3min
3min

Setting the Chroma Delay

Set to the Chroma delay time for image displaying.
1. During the Supervisor setting mode, press the SET button repeatedly to select the Q.CHROMA DELAY.
2. Press the + and - buttons repeatedly to select the desired time (1SEC ~ 3SEC).
3. Press the Interphone button to store your setting.
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
Setting the Storage Image Number
Set to the number of storage image.
1. During the Supervisor setting mode, press the SET button repeatedly to select the R.STORAGE IMAGE
NUM.
2. Press the + and - buttons repeatedly to select the desired number (32, 64, 128 or 333).
3. Press the Interphone button to store your setting.
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
After set to the R.STORAGE IMAGE NUM, the stored all images are deleted.
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
17