Table of Contents
Advertisement
Loading Paper
Before you print, load paper for the type of printing you will do.
Loading Paper in the Cassette
Available Epson Papers
Paper or Media Type Settings - Printing Software
Selecting the Paper Settings for Each Source - Control Panel
Selecting the Default Paper Source Settings
Selecting the Universal Print Settings
Loading Paper in the Cassette
You can load paper up to this size in the paper cassette: Legal (8.5 × 14 inches [216 × 356 mm]).
Note: Before loading paper, make sure your product is not currently printing, scanning, or copying.
1. Pull out the paper cassette.
58
Advertisement
Table of Contents
Need help?
Do you have a question about the WF-4740 and is the answer not in the manual?
Questions and answers
scanner adf verstopt
To fix a jammed ADF on an Epson WF-4740 scanner, follow these steps:
1. Cancel the print job if necessary.
2. Remove any originals from the ADF.
3. Open the ADF cover.
4. Carefully remove any jammed pages.
5. Close the ADF cover and raise the document cover.
6. Carefully remove any remaining jammed pages.
7. Lower the document cover.
8. Raise the ADF input tray and remove any jammed pages.
9. Lower the ADF input tray.
10. Reload your originals, ensuring they are not bent, folded, curled, or have tape or staples. Do not exceed the ADF's capacity.
11. Follow the prompts on the LCD screen to clear any error messages.
If the issue persists, check other paper jam solutions.
This answer is automatically generated
WHAT DO I NEED TO DO TO TURN MY EPSON WF-4740 TO FAX A DOCUMENT
To set up your Epson WF-4740 to fax a document, follow these steps:
1. Connect the Fax Line: Plug a telephone line into the fax port on the printer.
2. Turn On the Printer: Ensure the printer is powered on.
3. Access Fax Setup: Use the control panel to navigate to the fax setup menu.
4. Enter Fax Settings: Configure necessary settings like country, area code, and fax header.
5. Load the Document: Place the document in the automatic document feeder (ADF) or on the scanner glass.
6. Dial the Recipient's Number: Use the keypad to enter the fax number.
7. Send the Fax: Press the "Start" or "Send" button to begin faxing.
If you skipped the fax setup during the initial installation, you can access the settings through the control panel later.
This answer is automatically generated