Table of Contents
Advertisement
• Vertical Alignment: For patterns 1 through 4, select the number representing the pattern with the
least amount of separation or overlap.
• Horizontal Alignment: Select the number representing the pattern with the least amount of
separation or overlap.
9. Select Done.
Parent topic:
Related tasks
Loading Paper in the Cassette
Cleaning the Paper Guide
If you see ink on the back of a printout, you can clean the paper guide rollers to remove any excess ink. If
paper does not feed correctly from the rear paper feed slot, you can use a cleaning sheet to clean the
rollers.
1. If printouts are smeared or scuffed, load plain paper in the paper source that you want to clean in this
size: Letter (8.5 × 11 inches [216 × 279 mm]) or A4 (8.3 × 11.7 inches [210 × 297 mm]).
2. Select Settings.
3. Select Maintenance.
Adjusting Print Quality
239
Advertisement
Table of Contents
Need help?
Do you have a question about the WF-4740 and is the answer not in the manual?
Questions and answers
scanner adf verstopt
To fix a jammed ADF on an Epson WF-4740 scanner, follow these steps:
1. Cancel the print job if necessary.
2. Remove any originals from the ADF.
3. Open the ADF cover.
4. Carefully remove any jammed pages.
5. Close the ADF cover and raise the document cover.
6. Carefully remove any remaining jammed pages.
7. Lower the document cover.
8. Raise the ADF input tray and remove any jammed pages.
9. Lower the ADF input tray.
10. Reload your originals, ensuring they are not bent, folded, curled, or have tape or staples. Do not exceed the ADF's capacity.
11. Follow the prompts on the LCD screen to clear any error messages.
If the issue persists, check other paper jam solutions.
This answer is automatically generated
WHAT DO I NEED TO DO TO TURN MY EPSON WF-4740 TO FAX A DOCUMENT
To set up your Epson WF-4740 to fax a document, follow these steps:
1. Connect the Fax Line: Plug a telephone line into the fax port on the printer.
2. Turn On the Printer: Ensure the printer is powered on.
3. Access Fax Setup: Use the control panel to navigate to the fax setup menu.
4. Enter Fax Settings: Configure necessary settings like country, area code, and fax header.
5. Load the Document: Place the document in the automatic document feeder (ADF) or on the scanner glass.
6. Dial the Recipient's Number: Use the keypad to enter the fax number.
7. Send the Fax: Press the "Start" or "Send" button to begin faxing.
If you skipped the fax setup during the initial installation, you can access the settings through the control panel later.
This answer is automatically generated