Table of Contents
Advertisement
Icons
Parent topic:
Selecting the Date and Time
Before faxing, select the current date, time, and daylight saving phase in your area, and choose your
preferred date and time format.
1. Press the
2. Select Settings.
Description
Displays the Supply Status screen.
Quiet Mode is enabled. Noise is reduced during printing, but the print speed may be
reduced. Press this icon to change the settings.
Quiet Mode is disabled. Press this icon to change the settings.
Displays the Fax Data Information screen.
The indicated setting has changed.
There is a problem with the indicated setting. Press the icon to resolve the problem.
No Ethernet connection.
An Ethernet connection is established.
No Wi-Fi connection.
A Wi-Fi network error has occurred or the product is searching for a connection.
A Wi-Fi connection is established. The number of bars indicates the connection's signal
strength.
No Wi-Fi Direct connection.
A Wi-Fi Direct connection is established.
Control Panel Buttons and Lights
home button, if necessary.
16
Advertisement
Table of Contents
Need help?
Do you have a question about the WF-4740 and is the answer not in the manual?
Questions and answers
scanner adf verstopt
To fix a jammed ADF on an Epson WF-4740 scanner, follow these steps:
1. Cancel the print job if necessary.
2. Remove any originals from the ADF.
3. Open the ADF cover.
4. Carefully remove any jammed pages.
5. Close the ADF cover and raise the document cover.
6. Carefully remove any remaining jammed pages.
7. Lower the document cover.
8. Raise the ADF input tray and remove any jammed pages.
9. Lower the ADF input tray.
10. Reload your originals, ensuring they are not bent, folded, curled, or have tape or staples. Do not exceed the ADF's capacity.
11. Follow the prompts on the LCD screen to clear any error messages.
If the issue persists, check other paper jam solutions.
This answer is automatically generated
WHAT DO I NEED TO DO TO TURN MY EPSON WF-4740 TO FAX A DOCUMENT
To set up your Epson WF-4740 to fax a document, follow these steps:
1. Connect the Fax Line: Plug a telephone line into the fax port on the printer.
2. Turn On the Printer: Ensure the printer is powered on.
3. Access Fax Setup: Use the control panel to navigate to the fax setup menu.
4. Enter Fax Settings: Configure necessary settings like country, area code, and fax header.
5. Load the Document: Place the document in the automatic document feeder (ADF) or on the scanner glass.
6. Dial the Recipient's Number: Use the keypad to enter the fax number.
7. Send the Fax: Press the "Start" or "Send" button to begin faxing.
If you skipped the fax setup during the initial installation, you can access the settings through the control panel later.
This answer is automatically generated