Canon imageRUNNER 1750 Copying Manual page 69

4
Press [-] or [+] to set the frame erase width.
NOTE
• The default setting is '1/8" (4 mm)'. You can adjust the frame erase width to between
1/16" and 1 15/16" (1 mm and 50 mm).
• To enter values in millimeters, press [mm]. (See Chapter 3, "Configuring the Machine's
Basic Settings," in the Reference Guide.)
● If you want to set the same width for all four borders:
3
● If you want to set the top, left, right, and bottom widths independently:
3-14
Erasing Shadows/Frame Lines (Frame Erase)
❑
Press [-] or [+] to set the frame erase
width ➞ press [OK].
❑
Press [Adjust Each Dim.].
❑
Select the side to set the erase width ➞
press [-] or [+] to set their respective
frame erase widths ➞ press [OK].
[Top], [Left], [Right], and [Bottom] on the
display refer to the positions of your
originals when you place them on the
platen glass or in the feeder.
NOTE
To return to the screen for setting the
same width for all four borders, press
[Adjust All At Once].