Canon imageRUNNER 1750 Copying Manual page 33

2
Specify the paper size and type.
NOTE
When Stack Bypass Standard Settings set to 'On', the screens for specifying the paper
size and type shown in the following steps are not displayed even if you load paper or
envelopes. Disable Stack Bypass Standard Settings to display the setting screens.
(See Chapter 3, "Configuring the Machine's Basic Settings," in the Reference Guide.)
● If you want to select a standard paper size:
2
2-6
Selecting the Paper Size
NOTE
• [Transparency] can be selected only when [LTR] is selected as the paper size.
• If [Transparency] or [Labels] is selected, you cannot select the Offset + Collate,
Offset + Group, or Staple mode.
• For more information on paper sizes/types, see Chapter 7, "Appendix," in the
Reference Guide.
❑
Select the paper size ➞ press [Next].
NOTE
To select an A or B series paper size,
press [A/B-size].
❑
Select the paper type ➞ press [OK].