Electrical Requirements; Warning! This Appliance Must Be Earthed - Blomberg FNT4550 User Manual

Electrical
Requirements
Before you insert the
plug into the wall socket
make sure that the
voltage and the frequency
shown on the rating
plate inside the appliance
corresponds to your
electricity supply.
Rating label is on the left
hand side of inner liner.
We recommend that this
appliance be connected
to the mains supply via a
suitable switched
and fused socket. The
appliance must be
positioned so that the
plug is accessible.
Should the mains lead
of the appliance become
damaged or should it
need
replacing at any time, it
must be replaced by a
special purpose made
mains lead which can
only be obtained from a
BLOMBERG Authorised
Service Agent.
Warning! This
Appliance Must Be
Earthed
If the fitted moulded plug
is not suitable for your
socket, then the plug
should be cut off and an
appropriate plug fitted.
Destroy the old plug
which is cut off as a plug
with bared cord could
cause a shock hazard
if inserted into a socket
elsewhere in the house.
The moulded plug
on this appliance
incorporates a 13 A
fuse. Should the fuse
need to be replaced an
ASTABEAB approved BS
1362 fuse of the same
rating must be used. Do
not forget to refit the fuse
cover. In the event of
losing the fuse cover the
plug must not be used
until a replacement fuse
cover has been fitted.
Colour of the replacement
fuse cover must be the
same colour as that
visible on the pin face of
the plug. Fuse covers are
7
EN