Setting The Ipx/Spx Protocol; Setting The Netware Settings - Toshiba E-STUDIO477S Advanced Manual

SETTING ITEMS (ADMIN)
3
Confirm the settings and press [OK].
1
2
You will be returned to the NETWORK menu.
Memo
• The IPv6 address acquired from the DHCPv6 server is
displayed.
3

Setting the IPX/SPX protocol

You can set the IPX/SPX protocol in this equipment. The IPX/
SPX protocol is normally used to communicate with the
NetWare file server through the network.
4
5
Item name
ENABLE IPX/SPX • ENABLE — Press this button to use
• DISABLE — Press this button to
6
FRAME TYPE Press [AUTO] to automatically detect
the appropriate frame type, or press a
specific frame type button. If you do not
know the frame type that must be used,
select [AUTO].

Setting the NetWare settings

7
You can set the NetWare configuration to be connected.
Note
• This option must be set when you use the NetWare file
server for Novell printing.
Description
the IPX/SPX protocol in this
equipment.
disable the IPX/SPX protocol.
Item name
ENABLE Netware
ENABLE
BINDERY
ENABLE NDS
CONTEXT
TREE
FILE SERVER
NAME
Memo
• When you press [CONTEXT], [TREE] or [FILE SERVER
NAME], the on-screen keyboard is displayed.
For details of the on-screen keyboard, see the following
page:
 P.227 "On-screen keyboard"
• You can enable both bindery and NDS modes at the same
time.
- 182 -
Description
• ENABLE — Press this button to
use the NetWare protocol.
• DISABLE — Press this button to
disable the NetWare protocol.
• ENABLE — Press this button to
enable communication with the
NetWare file server in bindery
mode.
• DISABLE — Press this button to
disable communication with the
NetWare file server in bindery
mode.
• ENABLE — Press this button to
enable communication with the
NetWare file server in NDS mode.
• DISABLE — Press this button to
disable communication with the
NetWare file server in NDS mode.
Press this button to enter the NDS
context in which the NetWare print
server for this equipment is located.
This must be entered when you
connect the NetWare file server in the
NDS mode.
Press this button to enter the NDS tree.
This must be entered when you
connect the NetWare file server in the
NDS mode.
Press this button to enter the NetWare
file server name. It is recommended
that this be entered when you connect
the NetWare file server in bindery
mode.