Panasonic KX-TVM50 Programming Manual page 91

• If "None" is selected, the prompt mode of previous process will be continued, or "Primary"
language will be selected.
Value Range
None, Primary, Guidance No. (KX-TVM50: No. 1-3, KX-TVM200/KX-NCV200: No. 1-10)
Programming Manual References
"Incoming Call Service Prompt" in 2.3.1 Service Group
Feature Manual References
2.2.16 Custom Service
Menu Repeat Cycle
Specifies the number of times the Custom Service menu message will be repeated for the caller.
Value Range
1–3 times
Feature Manual References
2.2.16 Custom Service
Call Transfer Anytime
Specifies the type of dialling that the VPS accepts during the Custom Service in addition to the single-
digit Custom Service options. This setting allows callers to dial numbers to connect themselves to an
extension or mailbox or enter a PIN.
Note
• If you only need to allow callers to dial single-digit Custom Service option numbers, set this
parameter to "No". When set to a value other than "No", the VPS always waits for the amount
determined by the "Wait for Second Digit" setting before handling the call. This will cause a
delay between the time the caller dials a single-digit Custom Service option number and
when the call is actually handled.
Value Range
Extn: enables callers to be transferred directly to their intended party by dialling the extension
number.
Mbx: enables callers to leave messages in a mailbox by entering the mailbox number.
PIN: enables callers to be transferred directly to the specified party according to the setting for PIN
Call Routing Service by dialling PIN.
No: disables extension transfer and mailbox transfer; only 1-digit entries will function (following the
Custom Service menu)
Feature Manual References
2.2.16 Custom Service
2.4 Service Settings
Programming Manual 91