Pos: 37.1 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Bedienelemente/Feldbuskoppler/-controller/Betriebsartenschalter - Überschrift 3, Ansicht und Einleitung (Controller) @ 4\mod_1239106871099_21.doc @ 30280 @ 3 @ 1

4.4.2

Mode Selector Switch

The mode selector switch is located behind the cover flap.

Figure 26: Mode selector switch (closed and open damper of the service port)

Table 15: Mode selector switch

Number

The operating mode switch determines the loading, starting and stopping of the

PLC-application by the controller. This multifunction sliding switch features 3

slide lock positions and a push-button function.

The sliding switch is designed for a number of operations in compliance with

EN61131T2.

Property damages due to set outputs!

Please note that set outputs remain set, when you switch the operating switch

from "RUN" to "STOP" during the current operation. Since the program is no

longer processed, software-related switch offs, i.e. by initiators, are ineffective.

Therefore, program or define all outputs, so that these switch to a safe mode at a

program stop.

Pos: 37.2 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Bedienelemente/Feldbuskoppler/-controller/Hinweis: Definieren der Ausgänge für einen Programm-Stopp! (für Betriebsartenschalter mit WBM) @ 4\mod_1240571895008_21.doc @ 31297 @ @ 1

Defining the outputs for a program stop!

In order to switch the outputs to a safe mode at the program stop, define the status

of the outputs at "STOP".

For this, open in the web-based Management System (WBM)

a website via the "PLC" link, on which you can define the function

Process image - Set outputs to zero, if user program is

stopped.

Now activate this function by placing a check mark in the control box,

then all outputs are set to zero, if

this function is not activated, the outputs remain at the

last current value.

Pos: 37.3 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Bedienelemente/Feldbuskoppler/-controller/Betriebsartenschalter - Tabellen (881) @ 8\mod_1278942475895_21.doc @ 59670 @ @ 1

750-880, 750-880/025-000 ETHERNET Programmable Fieldbus Controller

1 1

Description

Open the damper

Operating mode switch

NOTICE

Note

WAGO-I/O-SYSTEM 750

Manual

Version 1.0.1

Table of Contents