Lenovo ThinkStation P710 User Manual page 127

7. Gently pivot the plastic retaining clip
module into the bracket at the same time.
Note: Ensure that the cable of the super capacitor module is oriented as shown.
Figure 102. Installing the super capacitor module into the bracket
8. Install the holder with the new super capacitor module into a PCI Express card slot. See "PCI card" on
page 106.
Note: It is recommended that you use the PCI Express card slot with the fewest lanes.
9. Connect the super capacitor module cable to the super capacitor module connector on the RAID
card as shown.
Figure 103. Connecting the super capacitor module cable
10. Reinstall the direct cooling air baffle if you have removed it. See "Direct cooling air baffle" on page 63.
1 on the bracket as shown and install the new super capacitor
1
.
Chapter 7 Installing or replacing hardware
115